APC GUTOR PXC IEC 10kVA, 3:3 400/400V, IP42, No Transformer, unitary or parallel redundant on option – GUPXC10H2

 

• Main Input/Output Voltage : 400 V 3 phases
• Wave type : Sine wave
• Bypass type : Built-in bypass
• Battery type : External battery system
• Warranty : 1-Year

 

PN : GUPXC10H2

 

---

 

Overview

 

High performance, compact 3 phase UPS power protection fully standardized for heavy industrial applications and harsh environments. Available in 3:3 and 3:1 configurations.

 

Published on lastbestprice.com

---

 

Detailed Tech Specification

 

Main
Main Input Voltage	400 V AC 3 phases
Other Input Voltage	400 V
Main Output Voltage	400 V 3 phases
Other Output Voltage	400 V
Rated power in W	8000 W
Rated power in VA	10000 VA
output connector type	Hard wire 5-wire (3P + N + E) 1
Battery type	External battery system
provided equipment	Dust filter Installation guide Network management card Parallel card Relay board User manual

 

General
Bypass wiring configuration	5 wire (3P + N + E)
Bypass voltage tolerance	+/- 10 %
Max bypass input current	16 A
Bypass current protection	25 A
Number of power module free slots	0
Number of power module filled slots	0
Redundant	No

 

Physical
colour	Light grey
Height	210 cm
Width	60 cm
Depth	80 cm
Net weight	310 kg
Mounting preference	No preference
Mounting mode	Not rack-mountable
Two post mountable	0
USB compatible	No

 

Input
network frequency	45…65 Hz
number of input connectors	1 hard wire 5-wire (3P + N + E)
input voltage limits	360…440 V 400 V
Maximum input current	23 A
Switching current capacity	32 A
Max short time withstand current	65 kA
Input harmonic distortion	Less than 5 % for full load
Input protection type	Upstream protection according to source
input current	23 A per phase (3 phases)
Load power factor	0.5 leading to 0.5 lagging without derating
Input Power Factor at Full Load	0.96

 

Output
Maximum configurable power in W	8000 W
Harmonic distortion	Less than 5 %
output frequency	50/60 Hz +/- 1 Hz sync to mains 60 Hz +/- 0.1 % for 60 Hz nominal unsynchronised 50 Hz +/- 0.1 % for 50 Hz nominal unsynchronised
Crest factor	Unlimited
UPS type	Double conversion online
Wave type	Sine wave
Output voltage tolerance	+/- 1 %
Output harmonic distortion	< 2% at 100% linear load and < 5% at 100% non-linear load
Output overload operation	10 minutes at 125% and 60 seconds at 150%
Required output current protection	25 A
Neutral output current	14 A
Bypass type	Built-in bypass
efficiency	93.3 % (full load) 93.6 % (half load) 92.8 % (in battery operation)
Maximum configurable power in VA	10000 VA

 

Conformance
Product certifications	CE
Marking	CE Mark
standards	IBC 2012 IEC 62040-1-1 IEC 62040-2 IEC 62040-3 ISTA 2B VFI-SS-111

 

Environmental
Ambient air temperature for operation	-10…40 °C
relative humidity	0…95 % non-condensing
Operating altitude	0…10000 ft
Ambient air temperature for storage	-15…40 °C
storage Relative Humidity	0…95 % Non-condensing
Storage altitude	0.00…4572.00 m
Acoustic level	65 dBA
Heat dissipation	1963 Btu/h
IP degree of protection	IP42 with air filter

 

Batteries & Runtime
Number of battery filled slots	0
Number of battery free slots	0
Max current discharge	26.2 A
Battery power in VAH	0 VAh runtime
Extended runtime	0

 

Communications & Management
Free slots	1
Preinstalled device	Network management card 2 with environmental monitoring, out of band access and Modbus
control panel	Multifunction LCD status and control console
alarm	Audible and visible alarms : prioritized by severity
Emergency power off	Yes

 

Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	230.0 cm
Package 1 Width	82.0 cm
Package 1 Length	108.2 cm
Package 1 Weight	357.74 kg

 

Contractual warranty
Warranty	1 year on-site repair or replace with factory authorized Start-Up

Published on lastbestprice.com