Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency

Provides notification of changing utility power and UPS power conditions

Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.

Automatically starts up the connected equipment upon the return of utility power.

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Warns when a battery is not available to provide backup power.

Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

Small UPS footprint provides maximum usage of valuable electrical room floorspace

Allows for reduced battery recharge time, prevents disturbances on the distribution system by correcting the power factor, protects the battery against damage caused by deep discharge and provides backfeed protection.

Ensures compatibility with equipment that has different plug types.

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Simplifies installation and UPS maintenance while minimizing space requirements.

Ensures clean, uninterrupted power to protected equipment when generator power is used.

UL60950, CSA60950, IEC60950, EN60950 safety approvals. Meets IEC 61000-4-5 Immunity To Surge, and GR-1089-CORE, Section 4, Lightning and AC Power Faults standards.

Reduces utility costs, generates less heat.

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Minimizes installation costs by enabling the use of smaller generators and cabling.

Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Step by step navigation and menu screens for critical system information and data. Information is easy to access and presented in a very intuitive way.

Provide easy-to-read status of the unit and utility power conditions.

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Provides early-warning fault analysis ensuring proactive component replacement.

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Ensures compatibility with different input frequencies.

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Enable management of your UPS by connecting it directly to the network.

The UPS is UL1778 Listed

Allows additional run time to be quickly added as needed.

Provides management of the UPS via a serial port.

Eliminates humming and heat generated when powering tube lights and fans

Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Designed for harsh electrical environments to save battery life.