APC Smart-UPS VT rack mounted 30kVA 480V in, 208V out w/5 batt mod., w/PDU & startup – SUVTR30KG5B5S
Overview
SUVTR30KG5B5S Features
APC Smart-UPS VT rack mounted 30kVA 480V in, 208V out w/5 batt mod., w/PDU & startup
-
Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.
-
Locking cabinetPrevents unauthorized access to the UPS.
-
Multiple cable-entry pointsProvides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.
-
Resettable circuit breakersEnables a quick recovery from overload events.
Smart-UPS VTFeatures & Benefits
Serviceability
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).
-
Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
-
Shippable with modules installedEnables pre-installation UPS staging and testing and faster installation.
Marketing Features
-
Network manageableProvides remote power management of the UPS over the network.
-
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Scalable runtimeAllows additional run time to be quickly added as needed.
-
Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
-
Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
Sustainability
-
EU CoC for UPSEnsures that UPSs sold in the EU are highly efficient
Availability
-
Battery modules connected in parallelDelivers higher availability through redundant batteries.
-
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
-
Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.
-
Scalable runtimeAllows additional run time to be quickly added as needed.
-
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Manageability
-
SmartSlotCustomize UPS capabilities with management cards.
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
-
LCD displayAlpha-Numeric Display which displays system parameters and alarms.
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
-
Network manageableProvides remote power management of the UPS over the network.
-
Programmable frequencyEnsures compatibility with different input frequencies.
Total Cost of Ownership
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
-
Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
-
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
Protection
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
-
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Detailed Tech Specification
Output
-
Output power capacity
24.0 KWatts / 30.0 kVA
-
Max Configurable Power (Watts)
24.0 KWatts / 30.0 kVA
-
Nominal Output Voltage
120V , 208V , 208V 3PH
-
Output Voltage Note
Configurable for 200 : 208 or 220V 3 Phase nominal output voltage
-
Efficiency at Full Load
93.3 %
-
Output Voltage Distortion
Less than 5% at full load
-
Output Frequency (sync to mains)
57 – 63 Hz for 60 Hz nominal
-
Output Frequency (not synced)
60Hz +/- 0.1% for 60Hz nominal
-
Load Crest Factor
Unlimited
-
Topology
Double Conversion Online
-
Waveform type
Sine wave
-
Overload Operation
60 seconds @ 125% and 30 seconds @ 150%
-
Maximum Output Current
92
-
Bypass
Built-in Maintenance Bypass, Built-in Static Bypass
Input
-
Nominal Input Voltage
480V 3PH
-
Input frequency
40 – 70 Hz
-
Input Connections
Hard Wire 4-wire (3PH + G)
-
Input voltage range for main operations
408 – 552 (480)V
-
Efficiency at Full Load
93.3 %
-
Input Power Factor at Full Load
0.98
Batteries & Runtime
-
Battery type
VRLA
-
Included Battery Modules
5
-
Typical recharge time
3hour(s)
-
Replacement Battery
-
Expected Battery Life (years)
3 – 5
-
RBC Quantity
5
-
Extended Run Options
APC-Smart-UPS-VT-rack-mounted-30kVA-480V-in-208V-out-w-5-batt-mod-w-PDU-startup
Communications & Management
-
Interface Port(s)
DB-9 RS-232 , SmartSlot
-
Pre-Installed SmartSlot™ Cards
-
Control panel
Multi-function LCD status and control console
-
Audible Alarm
Audible and visible alarms : configurable delays
-
Emergency Power Off (EPO)
Yes
Physical
-
Maximum Height
1995mm , 199.5CM
-
Maximum Width
600mm , 60.0CM
-
Maximum Depth
1075mm , 107.5CM
-
Net Weight
1040.91KG
-
Shipping weight
1075.91KG
-
Shipping Height
1995mm , 199.5CM
-
Shipping Width
600mm , 60.0CM
-
Shipping Depth
1075mm , 107.5CM
-
Color
Black
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-999.9meters
-
Storage Temperature
-50 – 40 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-15000meters
-
Audible noise at 1 meter from surface of unit
58.0dBA
-
Online thermal dissipation
6305.0BTU/hr
-
Protection Class
NEMA 1