Shop by Category
Special Promotion
Special Promotion
Special Promotion
Cisco 10GBASE SFP+ Modules – SFP-10G-SR=
[ratingwidget type="page"]
| Note: For full hardware support, including the perpetual network stack customers will require Smart Net Total Care for 24x7x365 Cisco Technical Assistance Center (TAC) support, |
| Cisco Smart Net Total Care Service |
| Fulfillment: UAE End Users only |
| Cisco 10GBASE SFP+ Modules Data Sheet |
Call for Price
Best Price: AED 0.00 on Credit / Debit card / Cash Payment (AED 0.00)
Cisco 10GBASE SFP+ Modules – SFP-10G-SR=
Cisco 10GBASE SFP+ Modules
A broad range of industry-compliant SFP+ modules for 10 Gigabit Ethernet deployments in diverse networking environments
Overview
The Cisco® 10GBASE SFP+ modules (Figure 1) give you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.
Figure 1. Cisco 10GBASE SFP+ modules
Features and benefits
Cisco SFP+ modules offer the following features and benefits.
● Industry’s smallest 10G form factor for greatest density per chassis
● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
● Digital optical monitoring capability for strong diagnostic capabilities
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco
Cisco SFP-10G-SR module
The Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.
Product specifications
Table 1 provides cabling specifications for the Cisco SFP+ modules.
Table 1. SFP+ port cabling specifications
|
Cisco SFP+ |
Wavelength (nm) |
Cable Type |
Core Size (Microns) |
Modal Bandwidth (MHz*km)*** |
Cable Distance* |
|
Cisco SFP-10G-SR-Sa Cisco SFP-10G-SRCisco SFP-10G-SR-X |
850 |
MMF |
62.5 62.5 50.0 50.0 50.0 50.0 |
160 (FDDI) 200 (OM1) 400 500 (OM2) 2000 (OM3) 4700 (OM4) |
26m 33m 66m 82m 300m 400m |
|
Cisco SFP-10G-LRM |
1310 |
MMF SMF |
62.5 50.0 50.0 G.652 |
500 400 500 – |
220m 100m 220m 300m |
|
Cisco SFP-10G-LR-Sa Cisco SFP-10G-LR Cisco SFP-10G-LR-X |
1310 |
SMF |
G.652 |
– |
10km |
|
Cisco SFP-10G-ER-S****a Cisco SFP-10G-ER**** |
1550 |
SMF |
G.652 |
– |
40km** |
|
Cisco SFP-10G-ZR-S*****a Cisco SFP-10G-ZR***** |
1550 |
SMF |
G.652 |
– |
80km |
|
Cisco FET-10G |
850 |
MMF |
50.0 50.0 50.0 |
500 (OM2) 2000 (OM3) 4700 (OM4) |
25m 100m 100m |
|
Cisco SFP-10G-BXD-I |
1330 |
SMF |
G.652 |
– |
10km |
|
Cisco SFP-10G-BXU-I |
1270 |
SMF |
G.652 |
– |
10km |
|
Cisco SFP-10G-BX40D-I****** |
1330 |
SMF |
G.652 |
– |
40km |
|
Cisco SFP-10G-BX40U-I****** |
1270 |
SMF |
G.652 |
– |
40km |
|
Cisco SFP-H10GB-CU1M |
– |
Twinax cable, passive, 30AWG cable assembly |
– |
– |
1m |
|
Cisco SFP-H10GB-CU1-5M |
– |
Twinax cable, passive, 30AWG cable assembly |
– |
– |
1.5m |
|
Cisco SFP-H10GB-CU2M |
– |
Twinax cable, passive, 30AWG cable assembly |
– |
– |
2m |
|
Cisco SFP-H10GB-CU2-5M |
– |
Twinax cable, passive, 30AWG cable assembly |
– |
– |
2.5m |
|
Cisco SFP-H10GB-CU3M |
– |
Twinax cable, passive, 30AWG cable assembly |
– |
– |
3m |
|
Cisco SFP-H10GB-CU5M |
– |
Twinax cable, passive, 24AWG cable assembly |
– |
– |
5m |
|
Cisco SFP-H10GB-ACU7M |
– |
Twinax cable, active, 30 AWG cable assembly |
– |
– |
7m |
|
Cisco SFP-H10GB-ACU10M |
– |
Twinax cable, active, 28 AWG cable assembly |
– |
– |
10m |
|
Cisco SFP-10G-AOC1M |
– |
Active Optical Cable assembly |
– |
– |
1m |
|
Cisco SFP-10G-AOC2M |
– |
Active Optical Cable assembly |
– |
– |
2m |
|
Cisco SFP-10G-AOC3M |
– |
Active Optical Cable assembly |
– |
– |
3m |
|
Cisco SFP-10G-AOC5M |
– |
Active Optical Cable assembly |
– |
– |
5m |
|
Cisco SFP-10G-AOC7M |
– |
Active Optical Cable assembly |
– |
– |
7m |
|
Cisco SFP-10G-AOC10M |
– |
Active Optical Cable assembly |
– |
– |
10m |
* Minimum cabling distance for -SR, -LRM, -LR, -ER modules is 2m, according to the IEEE 802.3ae.
** Links longer than 30km are considered engineered links as per IEEE 802.3ae.
*** Specified at transmission wavelength.
**** Requires 5 dB 1550nm fixed loss attenuator for < 20km. Attenuator is available as a spare. The part number is 15216 ATT LC 5=.
***** Requires 15dB attenuator if Link Distance < 5km.
Requires 10dB attenuator if Link Distance is between 5km and 25km.
Requires 5dB attenuator if Link Distance is between 25km and 45km.
****** Requires 15dB attenuator if Link Distance < 5km.
Requires 10dB attenuator if Link Distance is between 5km and 15km.
Requires 5dB attenuator if Link Distance is between 15km and 25km.
Table 2 lists the main optical characteristics for the Cisco SFP+ modules.
Table 2. Optical transmit and receive specifications
|
Product |
Type |
Transmit Power (dBm)* |
Receive Power (dBm)* |
Transmit and Receive Wavelength (nm) |
||
|
Maximum |
Minimum |
Maximum |
Minimum |
|||
|
Cisco SFP-10G-SR-S Cisco SFP-10G-SR |
10GBASE-SR 850nm MMF |
-1.2** |
-7.3 |
-1.0 |
-9.9 |
840 to 860 |
|
Cisco SFP-10G-SR-X |
10GBASE-SR, 10GBASE-SW and OTU2e 850nm MMF |
-1.2** |
-7.3 |
-1.0 |
-9.9 |
840 to 860 |
|
Cisco SFP-10G-LRM |
10GBASE-LRM 1310nm MMF and SMF |
0.5 |
-6.5 |
0.5 |
-8.4 (in average) and -6.4 (in OMA)*** |
1260 to 1355 |
|
Cisco SFP-10G-LR-S Cisco SFP-10G-LR |
10GBASE-LR 1310nm SMF |
0.5 |
-8.2 |
0.5 |
-14.4 |
1260 to 1355 |
|
Cisco SFP-10G-LR-X |
10GBASE-LR, 10GBASE-LW and OTU2e 1310nm SMF |
0.5 |
-8.2 |
0.5 |
-14.4 |
1260 to 1355 |
|
Cisco SFP-10G-ER-S Cisco SFP-10G-ER |
10GBASE-ER 1550nm SMF |
4.0 |
-4.7 |
-1 |
-15.8 |
1530 to 1565 |
|
Cisco SFP-10G-ZR-S Cisco SFP-10G-ZR |
10GBASE-ZR 1550nm SMF |
4.0 |
0 |
-7 |
-24 |
1530 to 1565 |
|
Cisco FET-10G |
FET-10G 850nm MMF |
-1.3 |
-8 |
-1 |
-9.9 |
840 to 860 |
|
Cisco SFP-10G-BXD-I |
10G-SFP Bidirectional for 10km |
0.5 |
-8.2 |
0.5 |
-14.4 |
1320 to 1340 (Tx) 1260 to 1280 (Rx) |
|
Cisco SFP-10G-BXU-I |
10G-SFP Bidirectional for 10km |
0.5 |
-8.2 |
0.5 |
-14.4 |
1260 to 1280 (Tx) 1320 to 1340 (Rx) |
|
Cisco SFP-10G-BX40D-I |
10G-SFP Bidirectional for 40km |
4.5 |
-2.7 |
-9 |
-21.2 |
1320 to 1340 (Tx) 1260 to 1280 (Rx) |
|
Cisco SFP-10G-BX40U-I |
10G-SFP Bidirectional for 40km |
4.5 |
-2.7 |
-9 |
-21.2 |
1260 to 1280 (Tx) 1320 to 1340 (Rx) |
* Transmitter and receiver power is in average, unless specified.
** The launch power shall be the lesser of the class 1 safety limit or the maximum receive power. Class 1 laser requirements are defined by IEC 60825-1: 2001.
*** Both average and OMA specifications must be met simultaneously.
Table 4. SFP+ optical modules color code
|
Product |
Bail Latch Color |
|
Cisco SFP-10G-SR-S Cisco SFP-10G-SRCisco SFP-10G-SR-X |
Beige |
|
Cisco SFP-10G-LRM |
Orange |
|
Cisco SFP-10G-LR-S Cisco SFP-10G-LR Cisco SFP-10G-LR-X |
Blue |
|
Cisco SFP-10G-ER-S Cisco SFP-10G-ER |
Red |
|
Cisco SFP-10G-ZR-S Cisco SFP-10G-ZR |
Green |
|
Cisco FET-10G |
Brown |
|
Cisco SFP-10G-BXD-I Cisco SFP-10G-BXU-I |
Blue |
|
Cisco SFP-10G-BX40D-I Cisco SFP-10G-BX40U-I |
Red |
|
Cisco SFP-H10GB-CU1M |
Beige |
|
Cisco SFP-H10GB-CU1-5M |
Black |
|
Cisco SFP-H10GB-CU2M |
Brown |
|
Cisco SFP-H10GB-CU2-5M |
Yellow |
|
Cisco SFP-H10GB-CU3M |
Orange |
|
Cisco SFP-H10GB-CU5M |
Gray |
|
Cisco SFP-H10GB-ACU7M |
Blue |
|
Cisco SFP-H10GB-ACU10M |
Red |
|
Cisco SFP-10G-AOC1M |
Beige |
|
Cisco SFP-10G-AOC2M |
Brown |
|
Cisco SFP-10G-AOC3M |
Orange |
|
Cisco SFP-10G-AOC5M |
Gray |
|
Cisco SFP-10G-AOC7M |
Blue |
|
Cisco SFP-10G-AOC10M |
Red |
Table 5 provides the maximum power consumption and operating temperature range ratings per Cisco SFP+ module.
Table 5. SFP+ modules maximum power consumption
|
Product |
Power Consumption (W) |
Operating Temperature Range |
|
Cisco SFP-10G-SR-S Cisco SFP-10G-SR |
1 |
COM |
|
Cisco SFP-10G-SR-X |
1 |
EXT |
|
Cisco SFP-10G-LRM |
1 |
COM |
|
Cisco SFP-10G-LR-S Cisco SFP-10G-LR |
1 |
COM |
|
Cisco SFP-10G-LR-X |
1 |
EXT |
|
Cisco SFP-10G-ER-S Cisco SFP-10G-ER |
1.5 |
COM |
|
Cisco SFP-10G-ZR-S Cisco SFP-10G-ZR |
1.5 |
COM |
|
Cisco FET-10G |
1 |
COM |
|
Cisco SFP-10G-BXD-I Cisco SFP-10G-BXU-I |
1 |
IND |
|
Cisco SFP-10G-BX40D-I Cisco SFP-10G-BX40U-I |
1.2 |
IND |
|
Cisco SFP-H10GB-CU1M |
1 |
COM |
|
Cisco SFP-H10GB-CU1-5M |
1 |
COM |
|
Cisco SFP-H10GB-CU2M |
1 |
COM |
|
Cisco SFP-H10GB-CU2-5M |
1 |
COM |
|
Cisco SFP-H10GB-CU3M |
1 |
COM |
|
Cisco SFP-H10GB-CU5M |
1 |
COM |
|
Cisco SFP-H10GB-ACU7M |
1 |
COM |
|
Cisco SFP-H10GB-ACU10M |
1 |
COM |
|
Cisco SFP-10G-AOC1M |
1 |
COM |
|
Cisco SFP-10G-AOC2M |
1 |
COM |
|
Cisco SFP-10G-AOC3M |
1 |
COM |
|
Cisco SFP-10G-AOC5M |
1 |
COM |
|
Cisco SFP-10G-AOC7M |
1 |
COM |
|
Cisco SFP-10G-AOC10M |
1 |
COM |
Dimensions
Dimensions (H x W x D): 8.5 x 13.4 x 56.5mm. Cisco SFP+ connectors typically weigh 75 grams or less.
Environmental Conditions and Power Requirements
Operating temperature range:
● Commercial temperature range (COM): 0 to 70°C (32 to 158°F)
● Extended temperature range (EXT): -5 to 85°C (23 to 185°F)
● Industrial temperature range (IND): -40 to 85°C (-40 to 185°F)
● Storage temperature range: -40 to 85°C (-40 to 185°F)
Warranty
● Standard warranty: 1 year
● Extended warranty (optional): Cisco SFP+ modules can be covered in a Cisco SMARTnet® Service support contract for the Cisco switch or router chassis
Be the first to review “Cisco 10GBASE SFP+ Modules – SFP-10G-SR=”
Related products
12% Off
Original price was: AED 616.00.AED 540.00Current price is: AED 540.00. excl. VAT
Reviews
There are no reviews yet.