APC Smart-UPS VT rack mounted 20kVA 208V w/4 battery modules exp. to 5, w/PDU & startup – SUVTR20KF4B5S

Product Category; Uninterruptible Power Supply (UPS)

Product Family; Smart-UPS VT

Input Voltage; 208 3PH

Output Voltage; 120, 208, 208 3PH

SUVTR20KF4B5S  Features

APC Smart-UPS VT rack mounted 20kVA 208V w/4 battery modules exp. to 5, w/PDU & startup

• Field-replaceable power distribution panel
  Ensures compatibility with equipment that has different plug types.
• Locking cabinet
  Prevents unauthorized access to the UPS.
• Multiple cable-entry points
  Provides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.
• Resettable circuit breakers
  Enables a quick recovery from overload events.

Smart-UPS VT  Features & Benefits

Marketing Features

• Scalable runtime
  Allows additional run time to be quickly added as needed.
• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.
• Network manageable
  Provides remote power management of the UPS over the network.

Serviceability

• Modular design
  Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Shippable with modules installed
  Enables pre-installation UPS staging and testing and faster installation.

Total Cost of Ownership

• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.

Availability

• Battery modules connected in parallel
  Delivers higher availability through redundant batteries.
• Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Scalable runtime
  Allows additional run time to be quickly added as needed.

Manageability

• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Network manageable
  Provides remote power management of the UPS over the network.
• LCD display
  Alpha-Numeric Display which displays system parameters and alarms.
• InfraStruXure Manager Compatible
  Enables centralized management via the APC InfraStruXure Manager.
• Programmable frequency
  Ensures compatibility with different input frequencies.
• LED status indicators
  Quickly understand unit and power status with visual indicators.
• SmartSlot
  Customize UPS capabilities with management cards.

Sustainability

• EU CoC for UPS
  Ensures that UPSs sold in the EU are highly efficient

Protection

• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Cold-start capable
  Provides temporary battery power when the utility power is out

Technical Specifications

Output

• Output power capacity

  16.0 KWatts / 20.0 kVA

• Max Configurable Power (Watts)

  16.0 KWatts / 20.0 kVA

• Nominal Output Voltage

  120V , 208V , 208V 3PH

• Output Voltage Note

  Configurable for 200 : 208 or 220V 3 Phase nominal output voltage

• Output Voltage Distortion

  Less than 5% at full load

• Output Frequency (sync to mains)

  57 – 63 Hz for 60 Hz nominal

• Output Frequency (not synced)

  60Hz +/- 0.1% for 60Hz nominal

• Other Output Voltages

  220

• Load Crest Factor

  Unlimited

• Topology

  Double Conversion Online

• Waveform type

  Sine wave

• Maximum Output Current

  61

• Output Connections
  (5) NEMA L21-20 (Battery Backup)

  (1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
• Bypass

  Built-in Maintenance Bypass, Built-in Static Bypass

Input

• Nominal Input Voltage

  208V 3PH

• Input frequency

  40 – 70 Hz

• Input Connections

  Hard Wire 5-wire (3PH + N + G)

• Input voltage range for main operations

  165 – 240V

• Other Input Voltages

  220

• Maximum Input Current

  53.0A

• Input Power Factor at Full Load

  0.98

Batteries & Runtime

• Battery type

  VRLA

• Included Battery Modules

  4

• Typical recharge time

  3hour(s)

• Replacement Battery

  SYBT4

• Battery Slots Empty

  1

• Expected Battery Life (years)

  3 – 5

• RBC Quantity

  4

• Extended Run Options

  APC-Smart-UPS-VT-rack-mounted-20kVA-208V-w-4-battery-modules-exp-to-5-w-PDU-startup

• Efficiency
  View Efficiency Graph

Communications & Management

• Interface Port(s)

  DB-9 RS-232 , SmartSlot

• Pre-Installed SmartSlot™ Cards

  AP9631

• Control panel

  Multi-function LCD status and control console

• Audible Alarm

  Audible and visible alarms : configurable delays

• Emergency Power Off (EPO)

  Yes

Physical

• Maximum Height

  78.54inches ( 1995mm , 199.5cm )

• Maximum Width

  23.62inches ( 600mm , 60.0cm )

• Maximum Depth

  42.32inches ( 1075mm , 107.5cm )

• Net Weight

  1644.0lbs. ( 747.27kg )

• Shipping weight

  1721.0lbs. ( 782.27kg )

• Shipping Height

  78.54inches ( 1995mm , 199.5cm )

• Shipping Width

  23.62inches ( 600mm , 60.0cm )

• Shipping Depth

  42.32inches ( 1075mm , 107.5cm )

• Color

  Black

Environmental

• Operating Environment

  32 – 104 °F ( 0 – 40 °C )

• Operating Relative Humidity

  0 – 95 %

• Operating Elevation

  0-3333ft ( 0-999.9meters )

• Storage Temperature

  -50 – 40 °C

• Storage Relative Humidity

  0 – 95 %

• Storage Elevation

  0-50000ft ( 0-15000meters )

• Audible noise at 1 meter from surface of unit

  58.0dBA

• Online thermal dissipation

  4238.0BTU/hr

• Protection Class

  NEMA 1

Conformance

• Approvals

  cUL Listed, ISO 14001, ISO 9001, UL 1778

• Standard warranty

  1 year repair or replace, Start-Up Service