HPE Networking Comware Switch 24G SFP w/8G Combo 4SFP+ EI 5140 – JL826A

 

• Memory and Processor : 512 MB SDRAM, 256 MB flash
• Power supply : At least 1 power supply is required (not included, must be ordered separately)
• Warranty : 5 Years

PN: JL826A

 

24 SFP ports (Of the 24, 8 are dual-personality ports – autosensing 10/100/1000BASE-T or SFP) min=0 \ max=24 SFP Transceivers 4 SFP+ ports min=0 \ max=4 SFP+ Transceivers Must select min 1 power supply 1U – Height

---

 

Overview

 

Features

 

 

Comprehensive Security Control

• The HPE Networking Comware Switch Series 5140 EI supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.
• ACLs provide IP Layer 2 to Layer 4 traffic filtering while supporting global ACL, VLAN ACL, port ACL, and IPv6 ACL.
• Dynamic ARP protection with functions such as ARP Detection and ARP packet validation that block broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data.
• Centralized security policy management and network protection with HPE Aruba Networking IMC End User Admission Domination (EAD) which integrates security policies, network access control, and access right control policies to form a cooperative security system.
• Enhance security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, and RADIUS/HWTACAS.

 

Simplified Management

• The HPE Networking Comware Switch Series 5140 EI can be seamlessly managed with HPE  Aruba Networking IMC to provide end-to-end network transparency with a consistent network experience through comprehensive configuration, compliance, and policy management.
• It supports SmartMC, an embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It offers features such as configuration backup, software version management and seamless switch replacement.
• RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.

 

Enhanced Quality of Service

• The HPE Networking Comware Switch Series 5140 EI supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.
• It provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
• Reduce unwanted network traffic with broadcast control and limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.

 

Published on lastbestprice.com

---

 

Detailed Tech Specification

 

Power consumption : 60W (Maximum), 30W (Idle)
Notes:
Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Power ratings for AC power supply is indicated previously.
For DC input power, idle power is 38W and maximum is 68W.
DC maximum input current is 8A. Units are supplied without a power supply.
Customer must buy 1 or 2 JD362B (AC) or JD366B (DC) power supply.

Heat dissipation : Maximum: 102/204 BTU/hr. (107.61/215.22 kJ/hr.) for AC powered units.
For DC powered units, heat dissipation is 130 BTU/hr. minimum, 232 BTU/hr. maximum.

Input voltage : AC Voltage: 100 VAC–240 VAC
DC Voltage: –48 VDC to –60 VDC

Ports : 16 SFP 100/1000 Mbps ports;

8 SFP dual-personality ports—10/100/ 1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports;

4 SFP+ fixed 1000/10000 SFP+ ports;

1 RJ-45 serial console port

Latency : 1000 Mb latency: < 5 µs
10 Gbps latency: < 3 µs

Routing capabilities : Table Size: 1024 entries;
MAC address: 16,384 entries IPv6 Ready Certified

Switching capacity : 128 Gbps

Stacking capabilities : IRF 9 switches

Throughput : 95 Mpps

Memory and processor : 512 MB SDRAM, 256 MB flash

Power supply : At least 1 power supply is required (not included, must be ordered separately)

PoE capability : 370W PoE+ Maximum, depending on model

Operating temperature : 23°F to 113°F (–5°C to 45°C)

Management features : HPE Aruba Networking IMC – Intelligent Management Center; SmartMC; Command-line interface; Web browser; SNMP manager

Warranty : Limited lifetime warranty. See the warranty duration guide.

Weight : 6 kg (13.23 lbs)

Dimensions : 4.36 x 44 x 36 cm (1.72 x 17.32 x 14.17 in)

 

Published on lastbestprice.com