APC NetShelter Rack PDU Advanced, Switched, 3Phase, 11kW 400V 16A or 11.5kW 415V 20A, 42 Outlets, IEC309 – APDU10250SW

 

---

 

Overview

APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2″ wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today’s high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

 

• “Input: 3PH, 520P6”
• “Outlets: (21) C13/C15/C19/C21, (21) C13/C15”
• “Full-featured network management capability”
• “Interactive LCD display”
• “Active power measurements (volts, amps, kW, kWh)”

 

 

 

 

 

 

 

 

 

 

 

Published on lastbestprice.com

---

 

Specifications

 

Main
Colour	Black
Product or component type	PDU
PDU type	Switched
Cord length	1.8 m
Complementary
Input Voltage	415 V 3 phases
	400 V 3 phases
Height	149.0 cm
Width	5.6 cm
Output Voltage	240 V
Depth	7.5 cm
Product weight	7.2 kg
Mounting location	Side
Mounting preference	No preference
Input Plug Type	IEC 60309 20 A 3P + N + PE
Mounting mode	Rack-mounted
Rack units	0U
Mounting position	Vertical
Communication port protocol	1000BASE-T
	10/100BASE-T
[In] rated current	16 A
Permissible voltage	200…240 V
	346…415 V
Input current limits	20 A
Load capacity	11500 VA
Network frequency	50/60 Hz
Outlet type and quantity	21 C13/C15/C19/C21
	21C13/C15
Environment
Product certifications	UKCA
	TAA compliance
	BAA compliance
Standards	UL 62368-1
	CSA C22.2 No 62368-1
	FCC part 15 Subpart B
	CE
	EN 62368-1
IP degree of protection	IP44
Ambient air temperature for operation	-5…60 °C
Relative humidity	5…95 %
Operating altitude	0…10000 ft
Ambient air temperature for storage	-25…65 °C
Storage Relative Humidity	5…95 %
Storage altitude	0…15240 m
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	172 cm
Package 1 Width	11.6 cm
Package 1 Length	20.8 cm
Package 1 Weight	9.2 kg
Contractual warranty
Warranty	3 years repair or replace

 

Published on lastbestprice.com