APC Smart-UPS VT 20kVA 400V w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable – SUVTP20KH2B4S

Overview

SUVTP20KH2B4S  Features

APC Smart-UPS VT 20kVA 400V w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable

• Parallel-capacity capable
  Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
• Parallel-redundant capable
  Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT  Features & Benefits

Marketing Features

• Scalable runtime
  Allows additional run time to be quickly added as needed.
• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.
• Network manageable
  Provides remote power management of the UPS over the network.

Serviceability

• Modular design
  Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Shippable with modules installed
  Enables pre-installation UPS staging and testing and faster installation.

Total Cost of Ownership

• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.

Availability

• Battery modules connected in parallel
  Delivers higher availability through redundant batteries.
• Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Scalable runtime
  Allows additional run time to be quickly added as needed.

Manageability

• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Network manageable
  Provides remote power management of the UPS over the network.
• LCD display
  Alpha-Numeric Display which displays system parameters and alarms.
• InfraStruXure Manager Compatible
  Enables centralized management via the APC InfraStruXure Manager.
• Programmable frequency
  Ensures compatibility with different input frequencies.
• LED status indicators
  Quickly understand unit and power status with visual indicators.
• SmartSlot
  Customize UPS capabilities with management cards.

Sustainability

• EU CoC for UPS
  Ensures that UPSs sold in the EU are highly efficient

Protection

• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Cold-start capable
  Provides temporary battery power when the utility power is out.

Detailed Tech Specifications

Output

• Output power capacity

  16.0 KWatts / 20.0 kVA

• Max Configurable Power (Watts)

  16.0 KWatts / 20.0 kVA

• Nominal Output Voltage

  400V 3PH

• Output Voltage Note

  Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage

• Efficiency at Full Load

  95.3 %

• Output Voltage Distortion

  Less than 5% at full load

• Output Frequency (sync to mains)

  47 – 53 Hz for 50 Hz nominal

• Output Frequency (not synced)

  50Hz +/- 0.1% for 50Hz nominal

• Other Output Voltages

  380, 415

• Load Crest Factor

  3 : 1

• Topology

  Double Conversion Online

• Waveform type

  Sine wave

• Maximum Output Current

  32

• Output Connections
  (1) Screw Terminals (Battery Backup)

  (1) Hard Wire 4-wire (3PH + G) (Battery Backup)

  (1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
• Bypass

  Built-in Maintenance Bypass, Built-in Static Bypass

Input

• Nominal Input Voltage

  400V 3PH

• Input frequency

  40 – 70 Hz (auto sensing)

• Input Connections

  Hard Wire 5-wire (3PH + N + G)

• Input voltage range for main operations

  304 – 477V

• Efficiency at Full Load

  95.3 %

• Other Input Voltages

  380, 415

• Maximum Input Current

  27.0A

• Input Power Factor at Full Load

  0.98

Batteries & Runtime

• Battery type

  VRLA

• Included Battery Modules

  2

• Typical recharge time

  4hour(s)

• Nominal Battery Voltage

  +/-192 V (split battery referenced to neutral)

• Battery Slots Empty

  2

• Expected Battery Life (years)

  3 – 5

• RBC Quantity

  2

• Extendable Run Time

  1

• Extended Run Options

  APC-Smart-UPS-VT-20kVA-400V-w-2-Batt-Mod-Exp-to-4-Start-Up-5X8-Int-Maint-Bypass-Parallel-Capable

• End of Discharge Battery Voltage

  +/-154 V

• Runtime
  View Runtime Graph
  View Runtime Chart

Communications & Management

• Interface Port(s)

  DB-9 RS-232 , Smart-Slot

• Pre-Installed SmartSlot™ Cards

  AP9631

• Control panel

  Multi-function LCD status and control console

• Audible Alarm

  Audible and visible alarms prioritized by severity

• Emergency Power Off (EPO)

  Yes

Physical

• Maximum Height

  1490mm , 149.0cm

• Maximum Width

  523mm , 52.3cm

• Maximum Depth

  842mm , 84.2cm

• Net Weight

  415.0kg

• Shipping weight

  445.91kg

• Shipping Height

  1643mm , 164.3cm

• Shipping Width

  650mm , 65.0cm

• Shipping Depth

  1062mm , 106.2cm

• Color

  Black

• Units per Pallet

  1.0

Environmental

• Operating Environment

  0 – 40 °C

• Operating Relative Humidity

  0 – 95 %

• Operating Elevation

  0-999.9meters

• Storage Temperature

  -50 – 40 °C

• Storage Relative Humidity

  0 – 95 %

• Storage Elevation

  0-15000meters

• Audible noise at 1 meter from surface of unit

  64.0dBA

• Online thermal dissipation

  3112.0BTU/hr

• Protection Class

  IP 20

Conformance

• Approvals

  C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, RCM, VFI-SS-111

• Standard warranty

  1 year repair or replace, Start-Up Service