APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable - SUVTP30KH3B4S Price in Dubai UAE

APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable – SUVTP30KH3B4S

 

⚠ Product Discontinued On: 05-July-2021

End-of-Service On: 31-December-2030

Replacement Model

Galaxy VS UPS 30kW 400V 2 internal 9Ah smart modular battery strings expandable to 4 Start-up 5×8 – GVSUPS30KB4HS

36,057.00 AED excl. VAT

Discounted Price: 35,155.58 AED on Bank Transfer / Cash Payment (-901.43 AED)

Out of stock product

8 + 2 =
SKU: SUVTP30KH3B4S Category: Tags: ,

APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable – SUVTP30KH3B4S

 

 

 

 

 

SUVTP30KH3B4S  Features

 

APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable

  • Parallel-capacity capable
    Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
  • Parallel-redundant capable
    Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT  Features & Benefits

Sustainability
  • EU CoC for UPS
    Ensures that UPSs sold in the EU are highly efficient
Total Cost of Ownership
  • Temperature-compensated battery charging
    Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Manual maintenance bypass
    Reduces installation costs by eliminating the need for an external mechanical bypass.
Protection
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Frequency and voltage regulation
    Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serviceability
  • Shippable with modules installed
    Enables pre-installation UPS staging and testing and faster installation.
  • Modular design
    Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery replacement without tools
    Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Manageability
  • Programmable frequency
    Ensures compatibility with different input frequencies.
  • Network manageable
    Provides remote power management of the UPS over the network.
  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • LCD display
    Alpha-Numeric Display which displays system parameters and alarms.
  • InfraStruXure Manager Compatible
    Enables centralized management via the APC InfraStruXure Manager.
  • SmartSlot
    Customize UPS capabilities with management cards.
  • LED status indicators
    Quickly understand unit and power status with visual indicators.
Availability
  • Dual mains input
    Increases availability by allowing the UPS to be connected to two separate power sources.
  • Generator compatible
    Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Scalable runtime
    Allows additional run time to be quickly added as needed.
  • Battery modules connected in parallel
    Delivers higher availability through redundant batteries.
  • Automatic internal bypass
    Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Marketing Features
  • Scalable runtime
    Allows additional run time to be quickly added as needed.
  • Dual mains input
    Increases availability by allowing the UPS to be connected to two separate power sources.
  • Manual maintenance bypass
    Reduces installation costs by eliminating the need for an external mechanical bypass.
  • Network manageable
    Provides remote power management of the UPS over the network.
  • Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

 

Detailed Tech Specifications

 

Output

  • Output power capacity

    24.0 KWatts / 30.0 kVA

  • Max Configurable Power (Watts)

    24.0 KWatts / 30.0 kVA

  • Nominal Output Voltage

    400V 3PH

  • Output Voltage Note

    Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage

  • Efficiency at Full Load

    96.4 %

  • Output Voltage Distortion

    Less than 5% at full load

  • Output Frequency (sync to mains)

    47 – 53 Hz for 50 Hz nominal

  • Output Frequency (not synced)

    50Hz +/- 0.1% for 50Hz nominal

  • Other Output Voltages

    380, 415

  • Load Crest Factor

    3 : 1

  • Topology

    Double Conversion Online

  • Waveform type

    Sine wave

  • Maximum Output Current

    48

  • Output Connections
    (1) Hard Wire 4-wire (3PH + G) (Battery Backup)
    (1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
    (1) Screw Terminals (Battery Backup)
  • Bypass

    Built-in Maintenance Bypass, Built-in Static Bypass

Input

  • Nominal Input Voltage

    400V 3PH

  • Input frequency

    40 – 70 Hz (auto sensing)

  • Input Connections

    Hard Wire 5-wire (3PH + N + G)

  • Input voltage range for main operations

    304 – 477V

  • Efficiency at Full Load

    96.4 %

  • Other Input Voltages

    380, 415

  • Maximum Input Current

    41.0A

  • Input Power Factor at Full Load

    0.98

Batteries & Runtime

Communications & Management

  • Interface Port(s)

    DB-9 RS-232 , Smart-Slot

  • Pre-Installed SmartSlot™ Cards

    AP9631

  • Control panel

    Multi-function LCD status and control console

  • Audible Alarm

    Audible and visible alarms prioritized by severity

  • Emergency Power Off (EPO)

    Yes

Physical

  • Maximum Height

    1490mm , 149.0cm

  • Maximum Width

    523mm , 52.3cm

  • Maximum Depth

    842mm , 84.2cm

  • Net Weight

    536.82kg

  • Shipping weight

    568.18kg

  • Shipping Height

    1643mm , 164.3cm

  • Shipping Width

    650mm , 65.0cm

  • Shipping Depth

    1062mm , 106.2cm

  • Color

    Black

  • Units per Pallet

    1.0

Environmental

  • Operating Environment

    0 – 40 °C

  • Operating Relative Humidity

    0 – 95 %

  • Operating Elevation

    0-999.9meters

  • Storage Temperature

    -50 – 40 °C

  • Storage Relative Humidity

    0 – 95 %

  • Storage Elevation

    0-15000meters

  • Audible noise at 1 meter from surface of unit

    55.0dBA

  • Online thermal dissipation

    3685.0BTU/hr

  • Protection Class

    IP 20

Conformance

  • Approvals

    C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, RCM, VFI-SS-111

  • Standard warranty

    1 year repair or replace, Start-Up Service