HPE Aruba Networking AP‑605H (RW) 2‑Radio 3‑Band 2×2 Wi‑Fi 6E 1+4 ETH PSE USB Hospitality AP – S0B60A

 

HPE Aruba Networking 600H Series Hospitality Access Points deliver seamless, secure, high performance wireless connectivity to mission-critical hospitality, small branch, and remote work environments

---

 

Overview

 

Features

 

High Performance Wi-Fi 6E

• HPE Aruba Networking 600H Series Hospitality Access Points are fully Wi-Fi CERTIFIED® to meet all the requirements for for greater efficiency including orthogonal frequency-division multiple access (OFDMA), MU‑MIMO, and target wake time (TWT) to extend the battery life of devices.
• Faster performance with 6 GHz band that delivers up to 1200 MHz additional capacity and 3.6 Gbps maximum combined data rate to better support high-bandwidth, low-latency applications such as high-definition video.
• Configurable dual radios support any two of three Wi-Fi 6E bands (2.4, 5, and 6 GHz) and provide full Wi-Fi 6E coverage in a multi-AP environment.
• Enhanced wireless experience with ClientMatch technology that removes sticky client issues by steering a client to the AP where it receives a strong radio signal.
• Convenient wired connectivity and support for PoE with fast 2.5GbE uplink port, two 1GbE ports, and two 1GbE PSE ports capable of supplying up to total of 30W PoE.

 

Simplified Access with Enhanced Security

• The HPE Aruba Networking 600H Series Hospitality Access Points offer enhanced security with dynamic segmentation to reduce the time-consuming and error-prone task of managing complex and static VLANs, ACLs, and subnets by dynamically assigning policies and keeping traffic secure and separated.
• It improves network protection with WPA3 and Enhanced Open (OWE) for stronger encryption, authentication, and secure credentials for guest access.
• To simplify policy enforcement, the 600H series uses the policy enforcement firewall to encapsulate traffic from the AP to the gateway (or mobility controller) for end-to-end encryption and inspection.
• For enhanced device assurance, the 600H series includes an installed trusted platform module (TPM) for secure storage of credentials, keys, and boot code.

 

Ready for IoT

• HPE Aruba Networking 600H Series Hospitality Access Points include an integrated Bluetooth 5 and 802.15.4 radio for Zigbee support to simplify deploying and managing IoT-based location services, asset tracking services, security solutions, and IoT sensors.
• The target wake time (TWT) establishes a schedule for when clients need to communicate with an access points to help improve client power savings and reduces airtime contention with other clients.
• Advanced IoT coexistence (AIC) feature uses built-in filtering to allow Wi-Fi and BLE/Zigbee radios to operate at maximum capacity without the impact of interference.
• Intelligent power monitoring (IPM) provides insights into energy consumption. Our APs continuously monitor and report hardware energy usage. Unlike other the vendors’ APs, our APs can also be configured to enable or disable capabilities based on available PoE power.

 

Published on lastbestprice.com

---

 

Detailed Tech Specification

 

Deployment : Hospitality; Indoor

Wi-Fi generation : Wi-Fi 6E (802.11ax with 6 GHz)

Wi-Fi radios : Dual 2×2

Radio configuration options : 2.4 GHz and 5 GHz or
2.4 GHz and 6 GHz or
5 GHz and 6 GHz

Max bandwidths and peak data rate per band : 20/40 (2.4 GHz), 20/40/80 (5 GHz), 20/40/80/160 (6 GHz), and maximum peak data rate 3.6 Gbps

Wi-Fi antenna : AP-605H: Integrated omnidirectional antennas for 2×2 MIMO. Built-in antennas for vertical wall or desk-mounted orientation of the AP.

Ultra tri-band (UTB) filtering : No

IoT support : IEEE 802.15.4/Zigbee or Bluetooth 5

Integrated sensor : No

Location services : 802.11 FTM support; GNSS receiver

Cellular support : USB LTE modem (sold separately)

Wired network interface : 1 x 2.5GbE, 4 x 1GbE

MACsec support : No

Ports : Uplink (E0): Ethernet wired network port (RJ-45)
Downlink (E1-–E4): Ethernet wired network ports (RJ-45)(E1 and E2: POE-PSE)
USB 2.0 host interface (Type A connector)
Cellular radio module interface (accessible after removing the back cover)
Serial console interface (proprietary, micro-B USB physical jack)
Kensington security slot

Power sources : DC power; PoE-PD; PoE-PSE

AP operating system support : HPE Aruba Networking Wireless Operating System 10
HPE Aruba Networking Wireless Operating System 8
HPE Aruba Networking Instant OS 8

AP management : On-premises; Public Cloud; Virtual Private Cloud (VPC); as a Service

Certifications : Wi‑Fi Alliance®
Wi-Fi CERTIFIED® a, b, g, n, ac
Wi-Fi CERTIFIED 6
WPA, WPA2, and WPA3-–Enterprise with CNSA option, Personal (SAE), Enhanced Open (OWE)
WMM, WMM-PS, Wi-Fi Agile Multiband
Wi-Fi CERTIFIED Location
Bluetooth SIG
Ethernet Alliance (PoE-PD device, class 6, and PoE PSE device, class 4)
UL2043

Regulatory : FCC/ISED
CE marked
Low Voltage Directive 2014/35/EU
IEC/EN 62368-1
EN 60601-1-2
For more country-specific regulatory information and approvals, contact your HPE representative.

Warranty : Limited lifetime warranty. See the warranty duration.

Connectivity, standard : Wi-Fi 6E (IEEE 802.11ax)

Heat dissipation : Up to 65.2 BTU/hr (worst case, AP unit only, with full USB and PSE load)

Input voltage : IEEE 802.3af/at/bt (class 3, 4, or 6) PoE, or direct 48V DC power (via optional power supply)

Power consumption : Up to 50W (worst case, AP with full USB and PSE load)

Mounting : Using one of the (separate orderable) mount kits, the access point can be attached to a single or dual gang wall box, directly to a wall, or desk mounted. See the ordering guide.

Radio coverage : AP type: Indoor, tri-band, 2.4 GHz, 5 GHz and 6 GHz (dual concurrent) 802.11ax 2×2 MIMO

Differentiator : Available everywhere except, US, Puerto Rico, Israel, Japan, India and Egypt

 

Published on lastbestprice.com